Home > Products > Oil testers

ZYIIJ-II Automatic BDV Oil Tester

Product Parameters
Power supply:
Water content:
Gas content:
Particles size:
Application: Breakdown voltage testing


ZYIIJ-II Automatic BDV oil tester is the insulation oil tester. it is is special for testing insulating oil’s dielectric strength.
ZYIIJ-II automatic BDV oil tester is designed by IEC165 dielectric strength of insulating oil. Adopt industrial single chip to control. Applied large integrate circuit, new type I/O interface, the special tester and anti-jamming technology which greatly improved the capability of device.

* Operate simply
* Adopt menu management, impute parameter is ok
* Can be stored ninety-nine kinds of oil test data which is convenient to print and adjust the data .The test data can be stored 10 years when the electrical is power off
* The system clock can be run when be power off
* Be provided with software upgrade through RS232 and test with PC
* High capability of anti-jamming
* High precision
* Small size, light and run in the open air.

Technical Parameters:

Index name Data
Power supply AC220V±10%,50Hz
Output voltage 0-80KV or 0-100KV
Capacity 1.2KVA(1.6KVA、2.0KVA)
Speed of pressure rise about 2KV/S
Voltage test precision ±3%
Breakdown sensitivity <2KV
Wave difference ≤3%
Time of breakdown ≤10ms
Working condition temperature : 0℃~40℃
Humidity: The biggest comparatively humidity85%
Reserve circumstance temperature :-20℃~60℃
humidity : The biggest comparatively humidity75%
Working altitude: <1500m(if over1500mcan be designed specially)
Dimension 480mm*460mm*460mm



Copyright Zanyo Electromechanical And Machinery Co., Ltd, All Rights Reserved.

Leave a message X

You name *

Your tel

You E-mail *

Got a question *